It's easy enough to install and run the Readiness Report Creator on a single user's computer to create a readiness report. But what if you're in a large organization and need to create readiness reports for an entire department or branch office?
If you have your users run the UI wizard version of the Readiness Report Creator, you end up with separate Excel files, one for each user. That makes it difficult to see readiness from a departmental or office-wide perspective. You also have to rely on the users to run the Readiness Report Creator and follow the instructions correctly.
To identify files that have VBA macros that might be blocked from running, you can run the Readiness Report Creator from a command prompt and use the blockinternetscan option. For example, if you want to scan files in the c:\officefiles folder (and all its subfolders) on a device and save the JSON file with the results to the Finance share on Server01, you can run the following command.
If you are still running a previous version of MDT, you will need to upgrade to MDT 2013 in order to deploy these new operating systems and use these new features. This guide will assume you are upgrading from MDT 2012 Update 1. Before continuing, be sure to have a current backup or snapshot of your deployment server. This process, including wait times, should not take more than an hour.
MDT 2013 is able to support Windows 8.1 because of the underlying tools in Windows Assessment and Deployment Kit (ADK). Because of this, ADK 8.1 is a required prerequisite. Uninstall any previous version of the Automated Installation Kit (AIK) and ADK (including ADK 8) before continuing. Reboot your deployment server.
When I save the test data in Excel setup after running Laview program, it created an error as "Error - 41007 occurred at NI_report.lvclass:New Report.v -> ...NI reports; You musr have the LabVIEW Report Generation Toolkit for Microsoft Office Installed to create this type of report. The toolkit musr also have an activated license or be in evaluation mode."
Questions: Do I need to install LabView Report Generation Toolkit for Microsoft Office in my computer?. If yes, what is the LabView Report Generation Toolkit for Microsoft Office Version. Where can I find this software?. I use Labview 2011, Window 7, MS 2013 in computer.
I can not find this software by using this site: -Download LabVIEW 2011 Report Generation Toolkit for Microsoft Office : -report-generation-toolkit-for-microsoft-office-2011/2572/en/. When I click this link above, it is an error as Page could not found...
The Report Generation Toolkit is an add-on product that requires a license. If you need access to Office 2013 (which, logic suggests, came out in 2013), you might want to consider using a version of LabVIEW that is at least "current" with the data structure it needs to support (unless you believe that NI can "predict the future" and build compatibility into LabVIEW 2011 to match products that Microsoft will release two years later).
If you are interested in interacting with Microsoft Office 2013, why are you working so hard to download an evaluation product that NI says is not compatible with this version of Office? If you did a little searching of the Web on your own, you would have found both the Report Generation Toolkit Compatibility with Microsoft Office and LabVIEW table that says, clearly, that LabVIEW 2014 is the first version that NI says is compatible with Office 2013. You could also find NI's download site (or you could go to NI.com, where with a few (obvious) clicks you can get to the Download Site yourself.
This page shows supported versions of Report Generation Toolkit with Microsoft Office and LabVIEW development systems. Reference this information to ensure you install the correct toolkit version when upgrading or updating your system or software. Using incompatible versions may result in errors, or missing LabVIEW palettes or functions.
Note: The table above shows compatibility for 32-bit version of the Report Generation Toolkit with LabVIEW and Microsoft Office products. Although compatibility for 32-bit and 64-bit are largely the same for this toolkit, some differences exist. Check the readme for your version under System Requirements >> 64-bit Version for specifics on OS and Microsoft Office Compatibility.
Note: You must have both Microsoft Word and Microsoft Excel installed before installing the toolkit.Please refer to the Report Generation Toolkit for Microsoft Office readme and product page links in the related links section for more information about the toolkit.Related Links:Products and Services: NI LabVIEW Report Generation Toolkit for Microsoft Office
Today i will try to cover a part of Microsoft Deployment Toolkit 2013 and how can create a custom iso of Windows. It's very easy to create an iso of Windows to use it and setup multiple PC'S. Most of the time IT needs a custom iso with basic softwares that use a company or specific drivers from pc's to included in the iso. This can be happened with MDT 2013 and i will explain step by step in this article how can install the MDT 2013 and create a custom iso for your references.
Before start to use MDT 2013 you must join the Server in the Domain and create a new user in your Active Directory Users and Computers to assign permission for the Deployment Share and the Capture subfolders. If you will install MDT 2013 only in your local environment you must create a local user and assign permissions in Deployment Share.
MDT 2013 support adding full source of Windows DVD ISO and custom images that you have created. In this case will create a Reference Image from a source setup files of Windows. If you have an iso file of Windows open the folder which have the iso and right click select Mount. Then you will see a new DVD Drive in My Coputer with the files of Windows iso to import in MDT 2013.
Understand rules of MDT Deplyment Share is critical to successful using MDT 2013. After finish all the tasks must configure the Rules of Deployment Share
We automate the task for the installation of Windows with Office 2013. You must finish a lot of tasks until create a custom ISO but you will do only once and you don't need to do it again. You can use this solution before proceed with an upgrade in your company from Windows 7 to Windows 8.1 or Windows 10.
I installed developers toolkit for visual studio 2011. I want to develop a plugin for MS CRM 2013. I am facing a problem, I chose dynamics crm -> plugin library in project selection. One window appears to connects to CRM through visual studio, where I filled my CRM discovery server name, port number, authentication details. I can log in successfully and it shows me Organization, when I choose organization, windows wont let me choose solution.
I was troubleshooting a Dirty Environment Found error while Microsoft Deployment Toolkit (MDT) 2013 was installing Microsoft Office Professional Plus 2010. The error was caused because Microsoft Office Professional Plus 2010 was rebooting the desktop after its installation and the reboot was disrupting the MDT task sequence.
The Improving Health Care Response to Hypertensive Disorders of Pregnancy (HDP) toolkit was developed by the HDP Task Force to support timely recognition and response to maternal hypertension and preeclampsia. This version updates the 2014 California Department of Public Health and CMQCC Preeclampsia Toolkit and contains expanded content to cover all HDP.
This toolkit is an update to the Improving Health Care Response to Preeclampsia: A California Quality Improvement Toolkit, funded by the California Department of Public Health in 2014; supported by Title V funds.
For this you need understand the benefits of integrating the Microsoft Deployment Toolkit with Configuration Manager when deploying a new or updated version of the Windows operating system. As per Microsoft, MDT 2013 is a free, supported download from Microsoft that adds approximately 280 enhancements to Windows operating system deployment with System Center 2012 R2 Configuration Manager.
In this short post we will see how to integrate Configuration Manager with MDT 2013. Before you do this you can also go through key features in MDT 2013 and Why Integrate MDT 2013 with Configuration Manager. You can download the MDT 2013 by clicking on this link.
Each year, somewhere between 700,000 and 1,000,000 people in the United States fall in the hospital. A fall may result in fractures, lacerations, or internal bleeding, leading to increased health care utilization. Research shows that close to one-third of falls can be prevented. Fall prevention involves managing a patient's underlying fall risk factors and optimizing the hospital's physical design and environment. This toolkit focuses on overcoming the challenges associated with developing, implementing, and sustaining a fall prevention program.
Internet Citation: Preventing Falls in Hospitals. Content last reviewed March 2021. Agency for Healthcare Research and Quality, Rockville, MD. -safety/settings/hospital/fall-prevention/toolkit/index.html
I deployed office 2019 with windows 10 1903 and MDT. The image was captured successfully but when I go to run it in a task sequence in SCCM after the first reboot I receive the following errorWindows could not parse the unattend answer file for pass specialize. This only happens when Office 2019 is introduced into the image. Office 2013 and 2016 work just fine.
Office 2013 Toolkit for Microsoft Office and Windows XP, 7, 8, 8.1. If you want to activate Microsoft Products without spending the boat load of cash for them, there is an easy way, with the Office 2013 toolkit. It is a professional utility software that enables you to activate Microsoft products. The program carries a complete set of tools and functions that provide users with the support to manage to activate as well as licensing Microsoft Windows and Microsoft Office very efficiently. 2b1af7f3a8