3 BACKGROUND Steve Cobert BSc Aeronautical Engineering, Imperial College, London BAe Research Department Rover Group Investigation of ComputerVision s NURBS Developed: AUTOSURF top down approach MNEMONICS scripting language Honda resurfacing Topologies UK ICEM Surf Training, pre-sales and customer support 1999: Formed Geodigm ICEM & Alias Training, Support & Mentoring A-class surfacing Ford GT Exterior Concept modelling 3
Introduction Several advanced surface types are available as listed below. Variable Section Sweep Boundary Blend Section to Surfaces Blend Surface to Surface Blend A surface is created by sweeping a single
Datum > Curve Intersect First create at least one quilt on the surface of the model. Feature > Surface (> New) > Copy (do not use offset that creates a surface off the solid surface even with zero offset)
Basic 3D Design mastercam x getting started tutorials Mastercam X6 Basic 3D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document
A profile represents the ground surface along a specified path. A profile of the horizontal alignment showing the existing surface ground line is required before creating the vertical alignment, also known
Adding Cabinets Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools
Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.
Basic 2D Design mastercam x getting started tutorials Basic 2D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document was published.
Part Design Page 1 Tutorial Objectives Description This tutorial is an introduction to Part Design. Message This tutorial illustrates how CATIA can Design precise 3D mechanical parts with an intuitive
CREATE A 3D MOVIE IN DIRECTOR 2 Building Your First 3D Movie in Director Welcome to the 3D tutorial for Adobe Director. Director includes the option to create three-dimensional (3D) images, text, and animations.
Creating a Logo in CorelDRAW In this tutorial, we will look at creating a logo for an electrical contracting firm. Our goal is to create a logo that is clean and easily recognizable. Lighthouse Electric
Getting Started with ANSYS ANSYS Workbench Environment Overview The purpose of this tutorial is to get you started with the ANSYS Workbench environment. We will use a simple, static analysis of a single
Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
Introduction to Solid Modeling Using SolidWorks 2012 SolidWorks Simulation Tutorial Page 1 In this tutorial, we will use the SolidWorks Simulation finite element analysis (FEA) program to analyze the response
Creating a logo Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional. In this tutorial, you will create a logo for an imaginary coffee shop.
an then when I start to do the network surfaces it becomes dirty. I know something is wrong in the way I pick the lines for the network or the settings of the fonctions, but even when I try to split the lines and rearrange the combinations the results is not good, you can see on the picture:
Good Concept designers need approximately 3 days to build a whole car in surface representation, final surface models need month and dozens of engineers. In the end you see the model and ask yourself what needed all the time, it looks so simple. But its actually very hard to come to this point.So instead of doing cars, start small.
It looks like your problem is that you are trying to follow the curve of the fender in the side panel. NetworkSrf does not work around corners. What you can do is expend the lower edge of the side panel through the wheel well and create basically rectangular surface. The TRIM or SPLIT the wheel wells away from the side panel.
There are excellent product design tutorials on YouTube for Rhino and very helpful people here on this forum. Rather than attempting, as a beginner, what takes an ICEM or Alias user years to master, use simpler objects to learn Rhino and only increase difficulty level once you have understood what you learned so far.
ISD Expert functionsFillet: Radius / Chord / 2 diffetent Chordvalues Advanced FilletNew Approximation & Output capabilitiesTrimming of supports Ability to define separate continuityconditions on the fillet edges. i.e. G0, G1,G2 & G3 Multiplesupport surfaces are now supported 2 New Fillet creationcapabilities 2b1af7f3a8